A solid-beam front axle on which the steering knuckles span the axle ends. A solid bar front axle on which the steering knuckles span or straddle the axle ends. Dictionary of Automotive Terms. On wheeled vehicles, the axle may be fixed to the wheels, rotating with them, or fixed to the vehicle, with the wheels rotating around the axle. Axle capacity 22,000 kg. FRONT AXLE Reverse Elliot “I” section beam.

Reverse-Elliot type axle The Automotive Dictionary is the world's most comprehensive dictionary of the automotive industry. Front axle carries the weight of the front part of the automobile as well as facilitates steering and absorbs shocks due to road surface variations. The reverse Elliot front axles have hinged . 52 reverse Elliot front axles have hinged spindle yoke on spindle itself from AUTOMOBILE Automotive at The Oxford College Of Education

Although not technically part of the drive train, the following 2WD front axle-related procedures have been included in this section. For additional information on the Steering Knuckle and Pivot Pins, please refer to Suspension & Steering. Axle capacity 6,500 kg. . Reverse-elliot type axle Definition from Science & Technology Dictionaries & Glossaries. In the Elliot type front axles the yoke for king spindle is located on the ends of I-beam. Please do share to others. Front axle carries the weight of the front part of the automobile as well as facilitates steering and absorbs shocks due to road surface variations. The forked portion is integral with the steering knuckle. SERVICE BRAKE Air-over-hydraulic, dual circuits with air dryer, with two leading shoes for front and rear acting on all wheels. In Reversed Elliot type stub axle, the arrangement is reversed.

Fungsi front axle adalah untuk menyangga sebagian dari beban kendaraan pada roda depan (front wheels) dan untuk steering kendaraan. Design analysis and optimization of front axle for commercial vehicle using CAE.
Reverse-elliot type axle Definition … Bearings or bushings are provided at the mounting points where the axle is supported.

In Lamoine type stub axle, instead of yoke type hinge, an L-shaped spindle is used as shown in the figure. An axle is a rod or shaft that rotates the wheels and supports the weight of your vehicle. This type of stub axle uses a kingpin, a cotter and a yoke to connect to the front axle. The forked portion is … This type is commonly used as this facilitates the mounting of brake backing plate on the forged legs of the steering knuckle. An axle is a central shaft for a rotating wheel or gear. Glossary "reverse Elliot axle" Definition:A solid-beam front axle on which the steering knuckles span the axle ends. Generally dead front axles are three types. Engineering Dictionaries. The Elliot stub axle is attached to the front axle by placing in the yoke end with a kingpin and cotter to join the two together.

The reverse Elliot front axles have hinged spindle yoke on spindle itself instead of on the axle. Secara garis besar front axle dibagi menjadi front dead axle dan front drive axle.Drive axle dapat disebut dengan live axle atau powered axle.. Front Dead Axle.

More Resources: Stub axle can have any of four shapes given in fig 18.1. i) The Elliot stub axle is attached to the front axle by placing it in the yoke end with a King pin & cotiler to join the two together (fig:18.1(a)).
This kind of hub is used mainly on larger vehicles, where a beam axle is fitted instead of independent suspension. The reverse Elliot front axles have hinged spindle yoke on spindle itself instead of on the axle.